Getting an element defined in a core:html by its ID
I used this line to define a canvas element in my view.xml:
<core:HTML content="<div class="wrapper col-6"><canvas id="
myChart"width="800"height="400"></canvas></div>">
</core:HTML>
Now I want to get the element in the controller but the typical this.getView().byId("myChart") doesn't seem to work even though the site successfully loads a canvas with the ID.
Is there a way to get those types of elements defined inside a core:HTML tag for the controller?
If not, is there a different way to create a canvas or other HTML elements so that I can refer to them with an ID / use them in the controller?
sapui5
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
asked Nov 21 at 21:20
Nico
184
add a comment |
I used this line to define a canvas element in my view.xml:
<core:HTML content="<div class="wrapper col-6"><canvas id="
myChart"width="800"height="400"></canvas></div>">
</core:HTML>
Now I want to get the element in the controller but the typical this.getView().byId("myChart") doesn't seem to work even though the site successfully loads a canvas with the ID.
Is there a way to get those types of elements defined inside a core:HTML tag for the controller?
If not, is there a different way to create a canvas or other HTML elements so that I can refer to them with an ID / use them in the controller?
sapui5
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
asked Nov 21 at 21:20
Nico
184
add a comment |
I used this line to define a canvas element in my view.xml:
<core:HTML content="<div class="wrapper col-6"><canvas id="
myChart"width="800"height="400"></canvas></div>">
</core:HTML>
Now I want to get the element in the controller but the typical this.getView().byId("myChart") doesn't seem to work even though the site successfully loads a canvas with the ID.
Is there a way to get those types of elements defined inside a core:HTML tag for the controller?
If not, is there a different way to create a canvas or other HTML elements so that I can refer to them with an ID / use them in the controller?
sapui5
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
asked Nov 21 at 21:20
Nico
184
I used this line to define a canvas element in my view.xml:
<core:HTML content="<div class="wrapper col-6"><canvas id="
myChart"width="800"height="400"></canvas></div>">
</core:HTML>
Now I want to get the element in the controller but the typical this.getView().byId("myChart") doesn't seem to work even though the site successfully loads a canvas with the ID.
Is there a way to get those types of elements defined inside a core:HTML tag for the controller?
If not, is there a different way to create a canvas or other HTML elements so that I can refer to them with an ID / use them in the controller?
sapui5
sapui5
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
asked Nov 21 at 21:20
Nico
184
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
asked Nov 21 at 21:20
Nico
184
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
edited Nov 22 at 9:10
Boghyon Hoffmann
5,62252355
5,62252355
asked Nov 21 at 21:20
Nico
184
asked Nov 21 at 21:20
Nico
184
asked Nov 21 at 21:20
Nico
184
184
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
Like Jorg said, byId is for retrieving controls. So if you were to put an id on the HTML control, you could retrieve that control and then call getDomRef() on it to get the outermost element, which in your example would be the div. If you'd further only put the canvas inside the HTML control, you'd get that.
If you're accessing the id of the canvas directly, like Jorg suggested, you'll run into trouble if you're going to use the view twice inside a page, because the id of the canvas isn't unique anymore.
There is a third and IMHO preferable option, that is to use html directly inside the view. First you'll need to declare a namespace for it, like
xmlns:html="http://www.w3.org/1999/xhtml"
preferably right on your View element.
Then you can write html directly in your xml view like this:
<html:div class="wrapper col-6">
<html:canvas id="mycanvas" width="800" height="400"></html:canvas>
</html:div>
This way you're getting a proper (unique) id for your canvas and can access it as part of the view's dom with this.getView().getDomRef("-mycanvas"). Note the extra leading dash, because of internal id generation inconsistency in UI5. Also note that getDomRef() is considered protected, but I doubt it will change. Finally, remember that you can only get a domref for rendered controls, so you'll probably want to access it from an afterRendering event.
answered Nov 22 at 16:05
Rolf Grossmann
463
A much better implementation for the html canvas on the XML view. Maybe you can expand on why the extra leading dash is needed in this case? Thanks
– Andre F
Nov 22 at 16:18
add a comment |
The element created in this way is not 'registered' in UI5 framework like the other controls. byId() only checks the internal register.
You can use jQuery or standard JavaScript to fetch the element though, like $('#myChart') or document.querySelector('#myChart').
You will find the code for this in Core.js or Core-dbg.js.
answered Nov 22 at 2:00
Jorg
5,57133150
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53420623%2fgetting-an-element-defined-in-a-corehtml-by-its-id%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Like Jorg said, byId is for retrieving controls. So if you were to put an id on the HTML control, you could retrieve that control and then call getDomRef() on it to get the outermost element, which in your example would be the div. If you'd further only put the canvas inside the HTML control, you'd get that.
If you're accessing the id of the canvas directly, like Jorg suggested, you'll run into trouble if you're going to use the view twice inside a page, because the id of the canvas isn't unique anymore.
There is a third and IMHO preferable option, that is to use html directly inside the view. First you'll need to declare a namespace for it, like
xmlns:html="http://www.w3.org/1999/xhtml"
preferably right on your View element.
Then you can write html directly in your xml view like this:
<html:div class="wrapper col-6">
<html:canvas id="mycanvas" width="800" height="400"></html:canvas>
</html:div>
This way you're getting a proper (unique) id for your canvas and can access it as part of the view's dom with this.getView().getDomRef("-mycanvas"). Note the extra leading dash, because of internal id generation inconsistency in UI5. Also note that getDomRef() is considered protected, but I doubt it will change. Finally, remember that you can only get a domref for rendered controls, so you'll probably want to access it from an afterRendering event.
answered Nov 22 at 16:05
Rolf Grossmann
463
A much better implementation for the html canvas on the XML view. Maybe you can expand on why the extra leading dash is needed in this case? Thanks
– Andre F
Nov 22 at 16:18
add a comment |
Like Jorg said, byId is for retrieving controls. So if you were to put an id on the HTML control, you could retrieve that control and then call getDomRef() on it to get the outermost element, which in your example would be the div. If you'd further only put the canvas inside the HTML control, you'd get that.
If you're accessing the id of the canvas directly, like Jorg suggested, you'll run into trouble if you're going to use the view twice inside a page, because the id of the canvas isn't unique anymore.
There is a third and IMHO preferable option, that is to use html directly inside the view. First you'll need to declare a namespace for it, like
xmlns:html="http://www.w3.org/1999/xhtml"
preferably right on your View element.
Then you can write html directly in your xml view like this:
<html:div class="wrapper col-6">
<html:canvas id="mycanvas" width="800" height="400"></html:canvas>
</html:div>
This way you're getting a proper (unique) id for your canvas and can access it as part of the view's dom with this.getView().getDomRef("-mycanvas"). Note the extra leading dash, because of internal id generation inconsistency in UI5. Also note that getDomRef() is considered protected, but I doubt it will change. Finally, remember that you can only get a domref for rendered controls, so you'll probably want to access it from an afterRendering event.
answered Nov 22 at 16:05
Rolf Grossmann
463
A much better implementation for the html canvas on the XML view. Maybe you can expand on why the extra leading dash is needed in this case? Thanks
– Andre F
Nov 22 at 16:18
add a comment |
Like Jorg said, byId is for retrieving controls. So if you were to put an id on the HTML control, you could retrieve that control and then call getDomRef() on it to get the outermost element, which in your example would be the div. If you'd further only put the canvas inside the HTML control, you'd get that.
If you're accessing the id of the canvas directly, like Jorg suggested, you'll run into trouble if you're going to use the view twice inside a page, because the id of the canvas isn't unique anymore.
There is a third and IMHO preferable option, that is to use html directly inside the view. First you'll need to declare a namespace for it, like
xmlns:html="http://www.w3.org/1999/xhtml"
preferably right on your View element.
Then you can write html directly in your xml view like this:
<html:div class="wrapper col-6">
<html:canvas id="mycanvas" width="800" height="400"></html:canvas>
</html:div>
This way you're getting a proper (unique) id for your canvas and can access it as part of the view's dom with this.getView().getDomRef("-mycanvas"). Note the extra leading dash, because of internal id generation inconsistency in UI5. Also note that getDomRef() is considered protected, but I doubt it will change. Finally, remember that you can only get a domref for rendered controls, so you'll probably want to access it from an afterRendering event.
answered Nov 22 at 16:05
Rolf Grossmann
463
Like Jorg said, byId is for retrieving controls. So if you were to put an id on the HTML control, you could retrieve that control and then call getDomRef() on it to get the outermost element, which in your example would be the div. If you'd further only put the canvas inside the HTML control, you'd get that.
If you're accessing the id of the canvas directly, like Jorg suggested, you'll run into trouble if you're going to use the view twice inside a page, because the id of the canvas isn't unique anymore.
There is a third and IMHO preferable option, that is to use html directly inside the view. First you'll need to declare a namespace for it, like
xmlns:html="http://www.w3.org/1999/xhtml"
preferably right on your View element.
Then you can write html directly in your xml view like this:
<html:div class="wrapper col-6">
<html:canvas id="mycanvas" width="800" height="400"></html:canvas>
</html:div>
This way you're getting a proper (unique) id for your canvas and can access it as part of the view's dom with this.getView().getDomRef("-mycanvas"). Note the extra leading dash, because of internal id generation inconsistency in UI5. Also note that getDomRef() is considered protected, but I doubt it will change. Finally, remember that you can only get a domref for rendered controls, so you'll probably want to access it from an afterRendering event.
answered Nov 22 at 16:05
Rolf Grossmann
463
answered Nov 22 at 16:05
Rolf Grossmann
463
answered Nov 22 at 16:05
Rolf Grossmann
463
answered Nov 22 at 16:05
Rolf Grossmann
463
463
A much better implementation for the html canvas on the XML view. Maybe you can expand on why the extra leading dash is needed in this case? Thanks
– Andre F
Nov 22 at 16:18
add a comment |
A much better implementation for the html canvas on the XML view. Maybe you can expand on why the extra leading dash is needed in this case? Thanks
– Andre F
Nov 22 at 16:18
A much better implementation for the html canvas on the XML view. Maybe you can expand on why the extra leading dash is needed in this case? Thanks
– Andre F
Nov 22 at 16:18
A much better implementation for the html canvas on the XML view. Maybe you can expand on why the extra leading dash is needed in this case? Thanks
– Andre F
Nov 22 at 16:18
add a comment |
The element created in this way is not 'registered' in UI5 framework like the other controls. byId() only checks the internal register.
You can use jQuery or standard JavaScript to fetch the element though, like $('#myChart') or document.querySelector('#myChart').
You will find the code for this in Core.js or Core-dbg.js.
answered Nov 22 at 2:00
Jorg
5,57133150
add a comment |
The element created in this way is not 'registered' in UI5 framework like the other controls. byId() only checks the internal register.
You can use jQuery or standard JavaScript to fetch the element though, like $('#myChart') or document.querySelector('#myChart').
You will find the code for this in Core.js or Core-dbg.js.
answered Nov 22 at 2:00
Jorg
5,57133150
add a comment |
The element created in this way is not 'registered' in UI5 framework like the other controls. byId() only checks the internal register.
You can use jQuery or standard JavaScript to fetch the element though, like $('#myChart') or document.querySelector('#myChart').
You will find the code for this in Core.js or Core-dbg.js.
answered Nov 22 at 2:00
Jorg
5,57133150
The element created in this way is not 'registered' in UI5 framework like the other controls. byId() only checks the internal register.
You can use jQuery or standard JavaScript to fetch the element though, like $('#myChart') or document.querySelector('#myChart').
You will find the code for this in Core.js or Core-dbg.js.
answered Nov 22 at 2:00
Jorg
5,57133150
edited Nov 22 at 23:20
answered Nov 22 at 2:00
Jorg
5,57133150
answered Nov 22 at 2:00
Jorg
5,57133150
answered Nov 22 at 2:00
Jorg
5,57133150
5,57133150
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53420623%2fgetting-an-element-defined-in-a-corehtml-by-its-id%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
