Low voltage cabling - insulation












0














I have a closet that is colder than it should be - it is 2 degrees colder than the bedroom it's connected to. The closet is 4'x4', and has two exterior walls. The bedroom is 10'x10', with one exterior wall. I believe I need to improve the insulation in this closet. Aside from a flush mount light fixture, the only other penetration to the drywall is a Low voltage ring for network cabling - the topic of this post.



The cable is run from the attic, through the top plate of the wall. I plan on going into the attic and putting some spray foam around the hole in the top plate. Would it be beneficial, in addition to this, to add some insulation inside the low voltage ring? If so - how would I go about this? Is there a product already made for this?



Thanks!










share|improve this question







New contributor




Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.

























    0














    I have a closet that is colder than it should be - it is 2 degrees colder than the bedroom it's connected to. The closet is 4'x4', and has two exterior walls. The bedroom is 10'x10', with one exterior wall. I believe I need to improve the insulation in this closet. Aside from a flush mount light fixture, the only other penetration to the drywall is a Low voltage ring for network cabling - the topic of this post.



    The cable is run from the attic, through the top plate of the wall. I plan on going into the attic and putting some spray foam around the hole in the top plate. Would it be beneficial, in addition to this, to add some insulation inside the low voltage ring? If so - how would I go about this? Is there a product already made for this?



    Thanks!










    share|improve this question







    New contributor




    Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.























      0












      0








      0







      I have a closet that is colder than it should be - it is 2 degrees colder than the bedroom it's connected to. The closet is 4'x4', and has two exterior walls. The bedroom is 10'x10', with one exterior wall. I believe I need to improve the insulation in this closet. Aside from a flush mount light fixture, the only other penetration to the drywall is a Low voltage ring for network cabling - the topic of this post.



      The cable is run from the attic, through the top plate of the wall. I plan on going into the attic and putting some spray foam around the hole in the top plate. Would it be beneficial, in addition to this, to add some insulation inside the low voltage ring? If so - how would I go about this? Is there a product already made for this?



      Thanks!










      share|improve this question







      New contributor




      Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      I have a closet that is colder than it should be - it is 2 degrees colder than the bedroom it's connected to. The closet is 4'x4', and has two exterior walls. The bedroom is 10'x10', with one exterior wall. I believe I need to improve the insulation in this closet. Aside from a flush mount light fixture, the only other penetration to the drywall is a Low voltage ring for network cabling - the topic of this post.



      The cable is run from the attic, through the top plate of the wall. I plan on going into the attic and putting some spray foam around the hole in the top plate. Would it be beneficial, in addition to this, to add some insulation inside the low voltage ring? If so - how would I go about this? Is there a product already made for this?



      Thanks!







      insulation walls ceiling






      share|improve this question







      New contributor




      Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      share|improve this question







      New contributor




      Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      share|improve this question




      share|improve this question






      New contributor




      Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      asked 10 hours ago









      Mike Christiansen

      1042




      1042




      New contributor




      Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      Mike Christiansen is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






















          1 Answer
          1






          active

          oldest

          votes


















          5














          If there's no heat in this closet, and it has two external walls, and its only heat is whatever bleeds from the bedroom, then it will inevitably be colder than that bedroom. Frankly, a 2 degrees (F?) difference doesn't seem like a lot in this situation.



          My reasoning? In cold weather, heat will flow from that closet through those two outside walls and into the great outdoors. The only way heat will enter the closet is through the doors and wall shared with the bedroom, and that will only happen if there's a difference in temperature between the bedroom and the closet.



          Insulation will help a bit, but either adding explicit vents between the closet and bedroom, or actually adding a heater to the closet, is the only way you'll significantly reduce that temperature drop.






          share|improve this answer























          • I agree, in principle. If I didn't also have to seal around bathroom fans and such, I wouldn't be fussing with this closet. But, my wife is cold in her office (that bedroom), so I have to do what I can. Since I'm already in the attic, I'll be air sealing any penetrations for that closet. I'm not expecting miracles from insulating one hole - but, since I'm going to be doing this stuff anyway, might as well do a little bit more.
            – Mike Christiansen
            1 hour ago











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "73"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          noCode: true, onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });






          Mike Christiansen is a new contributor. Be nice, and check out our Code of Conduct.










          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f153402%2flow-voltage-cabling-insulation%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          5














          If there's no heat in this closet, and it has two external walls, and its only heat is whatever bleeds from the bedroom, then it will inevitably be colder than that bedroom. Frankly, a 2 degrees (F?) difference doesn't seem like a lot in this situation.



          My reasoning? In cold weather, heat will flow from that closet through those two outside walls and into the great outdoors. The only way heat will enter the closet is through the doors and wall shared with the bedroom, and that will only happen if there's a difference in temperature between the bedroom and the closet.



          Insulation will help a bit, but either adding explicit vents between the closet and bedroom, or actually adding a heater to the closet, is the only way you'll significantly reduce that temperature drop.






          share|improve this answer























          • I agree, in principle. If I didn't also have to seal around bathroom fans and such, I wouldn't be fussing with this closet. But, my wife is cold in her office (that bedroom), so I have to do what I can. Since I'm already in the attic, I'll be air sealing any penetrations for that closet. I'm not expecting miracles from insulating one hole - but, since I'm going to be doing this stuff anyway, might as well do a little bit more.
            – Mike Christiansen
            1 hour ago
















          5














          If there's no heat in this closet, and it has two external walls, and its only heat is whatever bleeds from the bedroom, then it will inevitably be colder than that bedroom. Frankly, a 2 degrees (F?) difference doesn't seem like a lot in this situation.



          My reasoning? In cold weather, heat will flow from that closet through those two outside walls and into the great outdoors. The only way heat will enter the closet is through the doors and wall shared with the bedroom, and that will only happen if there's a difference in temperature between the bedroom and the closet.



          Insulation will help a bit, but either adding explicit vents between the closet and bedroom, or actually adding a heater to the closet, is the only way you'll significantly reduce that temperature drop.






          share|improve this answer























          • I agree, in principle. If I didn't also have to seal around bathroom fans and such, I wouldn't be fussing with this closet. But, my wife is cold in her office (that bedroom), so I have to do what I can. Since I'm already in the attic, I'll be air sealing any penetrations for that closet. I'm not expecting miracles from insulating one hole - but, since I'm going to be doing this stuff anyway, might as well do a little bit more.
            – Mike Christiansen
            1 hour ago














          5












          5








          5






          If there's no heat in this closet, and it has two external walls, and its only heat is whatever bleeds from the bedroom, then it will inevitably be colder than that bedroom. Frankly, a 2 degrees (F?) difference doesn't seem like a lot in this situation.



          My reasoning? In cold weather, heat will flow from that closet through those two outside walls and into the great outdoors. The only way heat will enter the closet is through the doors and wall shared with the bedroom, and that will only happen if there's a difference in temperature between the bedroom and the closet.



          Insulation will help a bit, but either adding explicit vents between the closet and bedroom, or actually adding a heater to the closet, is the only way you'll significantly reduce that temperature drop.






          share|improve this answer














          If there's no heat in this closet, and it has two external walls, and its only heat is whatever bleeds from the bedroom, then it will inevitably be colder than that bedroom. Frankly, a 2 degrees (F?) difference doesn't seem like a lot in this situation.



          My reasoning? In cold weather, heat will flow from that closet through those two outside walls and into the great outdoors. The only way heat will enter the closet is through the doors and wall shared with the bedroom, and that will only happen if there's a difference in temperature between the bedroom and the closet.



          Insulation will help a bit, but either adding explicit vents between the closet and bedroom, or actually adding a heater to the closet, is the only way you'll significantly reduce that temperature drop.







          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited 9 hours ago

























          answered 10 hours ago









          Daniel Griscom

          4,69172236




          4,69172236












          • I agree, in principle. If I didn't also have to seal around bathroom fans and such, I wouldn't be fussing with this closet. But, my wife is cold in her office (that bedroom), so I have to do what I can. Since I'm already in the attic, I'll be air sealing any penetrations for that closet. I'm not expecting miracles from insulating one hole - but, since I'm going to be doing this stuff anyway, might as well do a little bit more.
            – Mike Christiansen
            1 hour ago


















          • I agree, in principle. If I didn't also have to seal around bathroom fans and such, I wouldn't be fussing with this closet. But, my wife is cold in her office (that bedroom), so I have to do what I can. Since I'm already in the attic, I'll be air sealing any penetrations for that closet. I'm not expecting miracles from insulating one hole - but, since I'm going to be doing this stuff anyway, might as well do a little bit more.
            – Mike Christiansen
            1 hour ago
















          I agree, in principle. If I didn't also have to seal around bathroom fans and such, I wouldn't be fussing with this closet. But, my wife is cold in her office (that bedroom), so I have to do what I can. Since I'm already in the attic, I'll be air sealing any penetrations for that closet. I'm not expecting miracles from insulating one hole - but, since I'm going to be doing this stuff anyway, might as well do a little bit more.
          – Mike Christiansen
          1 hour ago




          I agree, in principle. If I didn't also have to seal around bathroom fans and such, I wouldn't be fussing with this closet. But, my wife is cold in her office (that bedroom), so I have to do what I can. Since I'm already in the attic, I'll be air sealing any penetrations for that closet. I'm not expecting miracles from insulating one hole - but, since I'm going to be doing this stuff anyway, might as well do a little bit more.
          – Mike Christiansen
          1 hour ago










          Mike Christiansen is a new contributor. Be nice, and check out our Code of Conduct.










          draft saved

          draft discarded


















          Mike Christiansen is a new contributor. Be nice, and check out our Code of Conduct.













          Mike Christiansen is a new contributor. Be nice, and check out our Code of Conduct.












          Mike Christiansen is a new contributor. Be nice, and check out our Code of Conduct.
















          Thanks for contributing an answer to Home Improvement Stack Exchange!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.





          Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


          Please pay close attention to the following guidance:


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f153402%2flow-voltage-cabling-insulation%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          What visual should I use to simply compare current year value vs last year in Power BI desktop

          How to ignore python UserWarning in pytest?

          Alexandru Averescu